The Best Line Tubing to Use to Hook Water up to a Refrigerator

Water line hookup for refrigerator

Connect the tubing to

Something that you might not have considered is what types of plumbing material are you going to use. Cut the cold water line under the sink or in the basement and attach a copper T-fitting.

If not you will need

Coil the excess water line behind the refrigerator. Many refrigerators these days supply a source for drinking water inside or on the door and will make ice cubes for you. Twist the faucet supply line onto the female end of the adapter.

The Best Line Tubing to Use to Hook Water up to a Refrigerator

If not, you will need to run a line to the nearest cold water pipe, which is probably in the floor below your kitchen. Drill holes in the base cabinet walls to route the water line from beneath the sink to the rear of the refrigerator. Some have reported noticing a bad taste in their fridge water and ice. Push the refrigerator against the wall. Drill a hole either through the cabinet wall separating the space under the sink and the refrigerator or in the basement ceiling up to the refrigerator.

Tighten nuts if leaks occur. Insert the new water line into the opening on the tee. If you must use a horizontal pipe, place the hole for the valve either on the top or side of the pipe. The kit provides you with the required parts to hook up a water line to your refrigerator.

Drill holes in the base

Connect the tubing to the valve by hand, then turn one extra time with a wrench. Clamp any tubing inside the cabinets along the back of the cabinets, to keep it in place.

Clamp any tubing inside the cabinets